3M 2273ME-iD Metal Detector User Manual


 
4 78-8130-6151-8-E
Safety Information
Please read, understand and follow all safety information contained in these instructions
prior to the use of the 3M Cable/Pipe/Fault Advanced ME-Series Locator. Retain these
instructions for future reference.
Intended Use
The 3M Cable/Pipe/Fault Advanced ME-Series Locator is used to identify the placement
of underground utility lines. The system must be installed as specified in the 3M Cable/
Pipe/Fault Advanced Locator 2250ME/2273ME Series Operator Manual. It has not been
evaluated for other uses or locations. If this equipment is used in a manner not specified
by 3M, the protections provided by the equipment may be impaired.
m WARNING
If this equipment is used in a manner not specified by 3M, the protections provided by the
equipment may be impaired.
Explanation of Signal Word Consequences
m Warning:
Indicates hazardous situation which if not avoided, could result in
death or serious injury.
m Caution:
Indicates hazardous situation which if not avoided, could result in
minor or moderate injury.
Explanation of Product Safety Label Symbols
Do not throw away in normal trash.
c
Warning: Risk of electric shock
About This Manual
There are two basic models included in the 3M Dynatel Locator 2200M Series. The
2250ME is designed for cable/pipe locating. The 2273ME is designed for cable/pipe
and fault locating. The iD option (read/write capability to 3M
TM
EMS iD Markers) is
available for both models. There are three transmitter options: 3 Watt, 5 Watt, or 12 Watt.
This instruction manual will include all features. All instructions are applicable to all
products, unless noted.
In order to demonstrate all available functions, the illustrations depict the 2273ME-iD
receiver unit and the 12-watt transmitter. The 2250ME may vary from the
illustrations shown.