CHAPTER 4. DEFINING SYSTEM SETTINGS 4-13
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
.
Setting dialing timeouts
Strata CS uses timeouts that you specify to determine the end of a number that
was entered by a user. If users press # after entering the final digit of a number,
Strata CS dials the number immediately and does not wait for the timeout period
to elapse.
n Internal dialing incomplete timeout. Number of milliseconds before
Strata CS times out on an internal call if not enough digits were entered.
The default is 8000 milliseconds (8 seconds).
n Internal dialing ambiguous timeout. Number of milliseconds before
Strata CS times out on an internal call if the digits entered cannot be
resolved into a recognized number. The default is 3000 milliseconds (3
seconds).
n Dialing service incomplete timeout. Number of milliseconds before
Strata CS times out on an external call if not enough digits were entered.
The default is 8000 milliseconds.
n Dialing service ambiguous timeout. Number of milliseconds before
Strata CS times out on an external call if the digits entered cannot be
resolved into a recognized number. The default is 3000 milliseconds.
Note:
The default dialing timeouts work in most installations, and they should be
modified carefully.
