A SERVICE OF

logo

Open as PDF
next previous
DART 300 Migration Guide Sample Configurations
2110291 Rev 1.0 Page 9
Table 2-4 Host TCP Setup (client) (continued)
DART 200 Command DART 300 Equivalent Description
\Q2 (default)
N/A
Use hardware flow control (RTS/CTS). The
DART 300 supports only this flow control.
\T1 (default)
+WS70=20 Timed data forwarding (always used with binary
data). The DART 200 configuration assumes use
of the default value in S50 (20 tenths of a second).
*B0 (default)
N/A Disable broadcast reception.
*C1 (default)
N/A Enable SLIP TCP header compression.
*G1 (default)
N/A Multicast address selection.