Sierra Wireless 20070914 Manual

A SERVICE OF

next previous

Configuring your PinPoint X

Rev 3.0B Feb.08 40

• Requiredvariableparametersaredenotedwithitalicized

text,example,Dn.Thenisvariable.

• Acceptableparametersand/orspecificformatsarelisted

witheachcommand.

• Mostcommandswithparameterscanbeenteredwith?to

readthecurrentvalue(forexample,AT&D?willrespond

with“2”ifthedefaulthasnotbeenchanged).

• Optionalparametersaredenotedwithsquarebrackets[].

• ATCommandsarenotcasesensitive.Acapital“E”isthe

sameasalower‐case“e”.

• Whenyouareusingaterminalconnection,ifyouentera

commandwhichisrecognizedbythePinPointX,itwill

respondwith“OK”.Ifthecommandisnotrecognized,the

responsewillbe“ERROR”.

• Thosecommandsapplicableonlytocertainmodel

numbersofthePinPointXwillbenoted.

Caution: Symbols listed with commands, such as *, /, &, or ?, are

part of the command and must be included. Commands with symbols

other than * may require PassThru mode.