Sierra Wireless 20070914 Manual

A SERVICE OF

next previous

Configuration Commands

Rev 3.0B Feb.08 127

Figure 1-7: AceManager : Serial

En

ToggleATcommandechomode.

• n=0:EchoOff.

• n=1:EchoOn.

Note: With more than one connection types (serial, Telnet, and USB)

the echo command can be set differently on each interface.

Qn

TheATquiet‐modesetting.Ifquietmodeisset,therewillbe

noresponsestoATcommandsexceptfordataqueried.

• n=0:Off(Default).

• n=1:Quiet‐modeon.

S3=n

Thestandardendoflinecharacterusedtoindicatetheendof

anATcommand.Thischaracterisalsousedas thecarriage

returncharacterforframingresponsesandresultcodesin

commandstate.CannotbeconfiguredinAceManager.

• n=0‐127(ASCIIcharacternumber)

S4=n

Thestandardlinefeedcharactersentbythemodemtothehost

attheendofaresponseorreturncodeincommandstate.

CannotbeconfiguredinAceManager.

• n=0‐127(ASCIIcharacternumber)