Sierra Wireless 20070914 Manual

A SERVICE OF

next previous

Global Positioning System (GPS)

Rev 3.0B Feb.08 98

NMEA Configuration

Messages Over-The-Air (Remote)

ToconfigurethePinPointXtosendNMEAreportstoaremote

server,youwillneedtoset3commands:*PPIP,*PPPORT,and

*PPGPSR.

a. Set*PPIPand*PPPORTtotheIPaddressandportof

theservertowhichyouwantthereportssent.

Figure 10-24: AceManager : PinPoint - *PPIP/*PPPORT

b. SettheGPSReportType(*PPGPSR)toyourpreferred

NMEAsentenceformat.

Figure 10-25: AceManager : PinPoint - *PPGPRSR

• E0‐NMEAGGAandVTGsentences.

• E1‐NMEAGGA,RMC,andVTGsentences.

Local Host

LocalreportsaresenttothelocalIPaddressofthecomputeror

deviceconnectedtotheserialportorUSBportofthePinPoint

XusingPPP.ToconfigurethemodemtosendtothelocalIP,

youwillneedtoset3commands:*S53,*PPLATS,and

*PPLATSR.

a. Settheport(S53)tothelocalporttowhichyouwant

thereportssent.ThelocalIPaddresswillautomati

‐

callybeused.S53,inAceManager,ispartoftheMisc

group.