Directional Size Magnification (Inch)
83
2
Directional Size Magnification (Inch)
The suitable reproduction ratios will
be automatically selected when you
enter the horizontal and vertical
lengths of the original and copy im-
age you require.
1: Horizontal original size
2: Vertical original size
3: Horizontal copy size
4: Vertical copy size
Preparation
Specify the vertical and horizontal
sizes of the original and those of the
copy, as shown in the illustration.
Limitation
❒
If the calculated ratio is over the
maximum or under the minimum
ratio, it is adjusted to within the
available range of ratios automatical-
ly. However, with some ratios, parts
of the image might not be copied or
margins will appear on copies.
Note
❒ You can enter sizes within the fol-
lowing ranges.
❒ The reproduction ratios that you
can specify are 25-400% (25-200%
when placing originals in the doc-
ument feeder).
A
AA
A
Press the [
Reduce/Enlarge
] key.
B
BB
B
Press the [
Specifd. Ratio
] key.
C
CC
C
Press the [
Dirc.Size Mag.In
] key.
D
DD
D
Enter the horizontal size of the
original with the number keys,
andthenpressthe[
#
] key.
Note
❒ To change the value entered,
press the [
Clear
] or
{
{{
{
Clear/Stop
}
}}
}
key and enter the new value.
Metric
version
Vertical: 1 – 999mm (in 1mm
steps)
Horizontal: 1 – 9999 (in 1mm
steps)
Inch
version
0.1" – 99.9" (in 0.1" steps)
1
3
24
CP2M01EE
