40
Computer Input
This projector has a useful function to resize a projected screen.
When Digital zoom is selected, the On-Screen Menu disappears and
the message “D.Zoom” is displayed. Press the SELECT button to
expand the image. And press the POINT UP/DOWN/LEFT/RIGHT
button(s) to pan the image. The panning function can work only when
the original image is larger than screen size (1280 x 720).
Full
Digital zoom
NOTE
● This Screen Menu cannot be operated when “720p (HDTV)”, “1035i
(HDTV)”, or “1080i (HDTV)” is selected in the PC System Menu (p33).
● Digital. zoom cannot be selected when “480i”, “575i”, “480p”, or “575p”
is selected in the PC System Menu (p33).
● Digital zoom can not be selected when True is selected.
● While selecting Digital zoom, press CANCEL button then the message "D.
Zoom" disappear with keeping the screen size you have adjusted.
● While selecting Digital zoom, press RESET button then the adjustment goes
back to the factory default setting.
● This projector cannot display any resolution higher than 1280 X 720. If your
computer’s screen resolution is higher than 1280 X 720, reset the resolution
to the lower before connecting to the projector.
● The image data in other than the resolution (1280 x 720) is modified to fit
the screen size in initial mode.
● The panning function may not operate properly if the computer system
prepared in the PC Adjust Menu is used.
Provides image to fit screen size.
Normal
True
Screen Menu
Provides image in its original size. When the original image size is
larger than the screen size (1280 x 720), this projector enters “D.
zoom” mode automatically. "D. zoom" mode will be canceled after 10
seconds stop panning.
Provides an image to fit the horizontal size of the screen.
Screen Size Adjustment
Select the Screen Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
Select an item with the Point Up/Down button and press the
Point Left/Right button to set the screen size.
1
2
Direct Operation with Remote control
Pressing the SCREEN button on the remote control, you can resize
the projected screen.
IMAGE ADJ.
