29
Video Input
The Image Level Menu will
appear. Choose one of 4
image levels with the Point
Up/Down button and press the
SELECT button. A confirma-
tion box will appear and select
[Yes].
Press the Point Right button at
this icon to store the value.
When this function is on, it detects proper interleaving of 3-2 and 2-2
pull down for film-base sources and produces a suitable image for the
input source. (This function is available only when selecting L1 or L2
on Progressive for NTSC(480i), PAL, SECAM(575i).)
Film
This arrow indicates that there
are previous items. Select this
item and press the Point Up
button to go to the previous
item.
Lamp mode
This function allows you to change brightness of the screen.
Bright mode . . . . . . . . . Normal brightness
React image mode 1 . . The controlled brightness according with
input signal
React image mode 2 . .Less bright but quieter than React image
mode 1.
Theater black mode . . .
Lowers brightness and reduces the lamp
power consumption.
NOTE
● Progressive cannot be selected when 480p, 575p, 720p is selected.
● Auto black stretch and Contrast enhancement and Transient improvement in
the Advanced menu cannot be selected when the input source is HDMI.
● Overscan cannot be selected when Full through and Normal through are
selected in the Screen Size Adjustment menu.
Advanced menu
To store the adjustment data, select Store and press the Point Right
button. The Image Level Menu will appear. Choose one of 4 image
levels with the Point Up/Down button and press the SELECT button.
A confirmation box will appear and select [Yes].
Resets adjustments to their factory default settings.
Reset
Store
Interlace video signal can be converted to a progressive signal.
Off ···· Not activated.
L1 ···· Select “L1” for an active picture.
L2 ···· Select “L2” for a still picture.
Progressive
This function can be selected only when Advanced menu in the
Setting is On . You can adjust following items through this function.
Iris . . . . . . . . . . . . . . .Press the Point Left button to adjust Iris.It
works only to stop down from zero.
Gain R/G/B . . . . . . . . . . . .Adjusts red, green and blue to select
contrast of colors you like.
Offset R/G/B . . . . . . . . . . .Adjusts red, green and blue to select
brightness of the colors you like.
Gamma R/G/B . . . . . . . . . .Adjusts red, green and blue to select
neutral colors you like.
Auto black stretch . . . . . .When this function is On, the black color in
the bright image is shown up.
Contrast enhancement . .Adjusts the contrast of colors in the
brighter image. You can select from
Off/L1/L2/L3. L3 is the most contrasty.
Transient improvement . . . .Adjusts the sharpness of the outline. You
can select from Off/L1/L2/L3. L3 is the
sharpest.
Overscan . . . . . . . . . . . . .Adjusts overscanned area. It works only to
decrease the overscanned portion of the
screen from zero.
Direct Operation with Remote control
Pressing the LAMP button on the remote control, you
can select the lamp mode.
Pressing the RESET button on the remote control,
adjustments will reset to their factory settings.
