33
Computer Input
This projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustment
function provided in the projector. When selecting computer input, the projector automatically displays the most proper
image for the input signal. One of the following four displays appears on the system menu icon. If the projector does not
tune the input signal and the projected image is not displayed properly, or when you wish to adjust it manually, perform
manual adjustment as described on page 35 and 36.
When the projector cannot recognize the connected
signal as PC system provided in this projector, the Auto
PC adjustment function operates to adjust the projector
and the message “Auto” is displayed in the PC System
Menu icon. When the image is not provided properly,
manual adjustment is required. (p35, 36)
There is no signal input from the connected computer.
Check the connection of the computer and see if the
projector is set correctly.
(See “Troubleshooting” on page 52.)
Auto
– – – –
PC System Menu
Select the PC System Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
Choose the system that you want to select with the Point
Up/Down button and then press the SELECT button.
1
2
PC System Menu
PC system can also be selected manually if some PC systems appear
on the On-Screen Menu.
User preset adjustment in Computer Adjustment.
Adjustment data can be stored in Mode 1 - 5. (p35, 36)
Mode 1
Computer systems provided in the projector. The
projector chooses a proper system and displays it.
SVGA 1
*Mode 1 and SVGA 1 are examples.
Computer System Selection
Menu Operation
