36
Computer Input
Select the resolution at the Display area dialog box.
Display area
Adjusts the horizontal area displayed by this projector. Press the
Point Left/Right button to decrease/increase value.
Display area H
Adjusts the vertical area displayed by this projector. Press the Point
Left/Right button to decrease/increase value.
Display area V
Reset
Store
To store adjustment data, select Store and press the Point Right
button. A dialog box will appear and choose one of 5 modes and
then press the SELECT button.
Resets adjustments to their factory default settings.
Mode free
Vacant Mode
Shows values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and “Display
area V.”
Closes this dialog box.
To store adjustment data
To clear adjustment data
To clear adjustment data previously set, select Mode free and press
the Point Right button. A dialog box will appear and choose one of 5
modes and then press the SELECT button.
This Mode has parameters being stored.
NOTE
● Display area, and Display area (H/V), cannot be selected when “480i”,
“575i”, “480p”, “575p”, “720p(HDTV)”, “1035i(HDTV)”, or “1080i”(HDTV)
is selected in the PC System Menu (p33).
Select Store to store adjust-
ment data.
Direct Operation with Remote control
Pressing the RESET button on the remote control, adjustments will reset to
their factory settings.
