A SERVICE OF

logo

Open as PDF
next previous
Fonts
\text\etd\DA615\font
7.3 DA615 instruction manual
Dot size Dot size (character height) refers to the height of an upper-case
printed latter. The dot size is measured in pica points. One point
corresponds to 1/72 of an inch.
The heights of both types of font, those with fixed and those with
proportional character spacing, are measured in pica points.
0
1
(inch)
8dots
12 dots
24 dots
48 dots
72 dots = 1 inch
Pica dot
Underlining A piece of text may be highlighted by underlining. The otherwise
uniform typeface remains unchanged.
You can underline a single word.
Expanded mode
You can print the address (e. g. for large goods packages) twice as
wide while maintaining the proportional character width with respect
to the spacing.
This is normal width
This is expanded width