• When “H.264” is selected for “Recording format”, select the image capture size for “H.264 recording”
- “Image capture size” on the [SD memory card] tab.
• When “Alarm input” is selected for “Save trigger”, images will be saved with the image capture size
selected on the [Alarm] tab of the “Alarm” page.
*1
*2
H.264 recording
This setting is available only when “H.264” is selected for “Recording format” of the SD memory card.
When the [Set] button is clicked when “H.264” is selected in “Recording format”, the settings for “H.264
recording” will be displayed on the bottom of the tab.
[Image capture size]
Select the image capture size from the following.
Aspect ratio
Aspect ratio 4:3 QVGA/VGA
Aspect ratio 16:9 320x180/640x360
Picture (Camera) mode
1.3 mega pixel (VGA) [4:3] QVGA/VGA/1280x960
1.3 mega pixel (800x600) [4:3] QVGA/800x600/1280x960
1.3 mega pixel [16:9] 320x180/640x360/1280x720
3 mega pixel [4:3] QVGA/VGA/1280x960
3 mega pixel [16:9] 320x180/640x360
• Default: VGA
[Recording priority]
Select “Constant bit rate” or “Frame rate” for the H.264 recording mode.
• Constant bit rate: H.264 images will be recorded with the bit rate selected for “Max bit rate”.
• Frame rate: H.264 images will be recorded with the frame rate selected for “Frame rate*”.
• Default: Frame rate
[Frame rate*]
Select the frame rate for images to be recorded from the following.
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
• Default: 30fps*
Note
• When “Frame rate” is selected for “Recording priority”, this setting is available.
• “Frame rate*” is restricted by “Max bit rate”. For this reason, the frame rate may be lower than the
specified value when any value marked with an asterisk (*) is selected.
[Max bit rate]
Select the bit rate for images to be recorded from the following.
58 Operating Instructions
10 Configure the basic settings of the camera [Basic]
