19
19
Additional connection cables are not
provided with the TV. They should be
available at most electronic stores.
Part II: Installation
Connecting an Analog VCR
Analog Antennas or Wall Outlet
Cable
(Figure 1)
Connect the incoming cable to ANT-A on
the TV back panel.
Connect two coaxial cables as follows:
One from LOOP-OUT on the TV back panel to
ANTENNA IN on the VCR back panel.
One from VCR back panel ANTENNA OUT to
ANT-B on the TV back panel.
Now complete gur e 3, steps 1-2.
Connecting an Analog VCR
Cable Box
(Figure 2)
Connect the incoming cable to ANT-A on
the TV back panel.
Connect three coaxial cables as follows:
One from LOOP-OUT on the TV back panel to
IN on the back of the cable box.
One from OUT on the back of the cable box to
ANTENNA IN on the VCR back panel.
One from ANTENNA OUT on the VCR back
panel to ANT-B on the TV back panel.
Now complete gur e 3, steps 1-2.
Adding Composite Video or
S-Video with Audio Connections
(Figure 3)
Connect a video cable from VIDEO
OUT on the VCR back panel to VIDEO
INPUTS 1, 2, 3, or 4 on the TV back
panel.
If you have a S-VHS VCR, follow the same
steps using the S-Video terminals on the VCR
and TV (in place of the composite terminals).
Connect a set of audio cables from
AUDIO OUT on the VCR back panel to
AUDIO INPUT 1, 2, 3, or 4 on the TV
back panel. The red cable connects to
the R (right) channel and the white cable
connects to the L (left) channel. If your
VCR is mono (non-stereo), connect only
the white (left) cable.
Figure 3. Connecting the VCR Audio/Video.
Figure 2. Connecting VCR with cable box.
Figure 1. Connecting VCR with antennas or wall outlet
cable.
AUDIO OUT
AUDIO IN
VIDEO OUT
(Y/C)
MONITOR
1
L
R
L
R
1
2
TV back panel
Incoming Cable
IN
OUT
Antenna
VCR back panel
1
2 3
3
2
AUDIO OUT
AUDIO IN
VIDEO OUT
(Y/C)
MONITOR
1
L
R
L
R
1
2
IN
OUT
Antenna
VCR back panel
TV back panel
Incoming Cable
Cable Box
Rear Terminals
INOUT
1
2 4
2
3
3
4
IN
OUT
Antenna
AUDIO OUT
AUDIO IN
VIDEO OUT
(Y/C)
MONITOR
1
L
R
L
R
1
2
VCR back panel
If your VCR has a video
channel or RF ON/OFF
switch, set to OFF.
Attach
only
one
cable
type
1
1
Attach
only
one
cable
type
1
1
2
2
TV back panel
White
Red
White
Red
