7
7.7 Setting Up the Transmission
7-56
Using the Utility Mode Chapter 7
✎
Tip
If, at any time, you wish to quit setting a “TX OPERATION” function, press the
[No] key. When the message “STOP SETTING?” appears, press the [Yes] key
to quit.
Specifying the Setting for “SCAN CONTRAST”
1 Select the “TX OPERATION”.
❍ Refer to “Selecting the “TX OPERATION” menu .
2 Press the [1] key from the 10-Key
Pad to select “SCAN
CONTRAST”.
3 Using the [ ] and [ ] keys,
select one of the five settings
between “LIGHT” and “DARK”,
and then press the [Yes] key.
The “TX OPERATION” menu
appears again.
Specifying the Setting for “RESOLUTION”
1 Select the “TX OPERATION”.
❍ Refer to “Selecting the “TX OPERATION” menu .
2 Press the [2] key from the 10-Key
Pad to select “RESOLUTION”.
