6
6.1 Transmission Methods
6-6
Fax Transmission/Reception Methods Chapter 6
Batch Transmission
Multiple documents can be stored in the memory and faxed together at a specified
time. In order to use this function, the corresponding Utility mode function must first
be used to program a one-touch dial key with the batch transmission settings
(transmission time).
To fax using batch transmission
1 Load the document into the Auto Document Feeder.
2 If necessary, change the “Resolution” setting (p. 5-12).
3 Press the one-touch dial key
programmed with the desired
batch transmission settings.
4 Press the [Start] key to begin scanning the document.
The document is automatically sent at the specified time.
✎
Tip
To cancel a batch transmission, select “CANCEL RESERV.” from the
“FUNCTION” menu (p. 6-20).
