Set Up A New VX3X
Note: LXE recommends that installation or removal of accessories be performed on a clean, well-lit surface. When
necessary, protect the work surface, the VX3X, and components from electrostatic discharge.
While the VX3X is in a Hazardous Location DO NOT:
l Connect an external power source to the VX3X.
l Connect a USB device or audio jack to the VX3X.
l Connect a tethered scanner to the VX3X.
l Place the VX3X in a powered dock or cradle.
Hardware Setup
1. Connect accessories.
2. Connect cables.
3. Connect power cable.
4. Secure all cables to the VX3X with the Strain Relief Cable Clamps.
5. Press the Power key.
Software Setup
Prerequisite: Hardware setup is complete.
1. Calibrate Touch screen
2. Adjust Speaker Volume
3. Pair Bluetooth devices
4. Setup terminal emulation parameters
5. Save changed settings to the registry
6. Setup the LXE AppLock parameters
7. Set the LXE Scanner Wedge parameters
E-EQ-VX3XOGWW-G-ARC [ 1 ] VX3X User Guide
