Printing on Labels
Label Guidelines
Only use labels recommended for laser printers, such as HP LaserJet
labels. (See page 2-21 for ordering information.) See Appendix B for
media specifications.
• Print labels from Tray 1.
• Load labels print-side up.
• Use the rear output tray for labels.
• Remove labels from the output tray before printing another sheet.
Printing on labels
• Do not use labels that are separating from the backing sheet or are
wrinkled or damaged in any way.
• Do not use label sheets with the backing sheet exposed.
• Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer.
Caution If a sheet of labels becomes jammed in the printer, turn off the printer
and remove the toner cartridge. See the “Paper Jams” section starting on
page 5-2 to remove the jammed labels.
Figure 3-8
3
Printing Tasks
EN Printing Tasks 3-13
