A SERVICE OF

logo

6.5 Function Details When Selecting 1xEVDO
6-11
[3] Noise
Displays noise power within 1.23 MHz band. This is not power for
all noise bands.
The difference between this value and the display value for Wanted is
the same as the setting vale for C/N.
Note the following points for using the AWGN internal adder function.
When AWGN is set to On, the power for 1xEVDO modulation wave are
set to match the setting value for RF Level. In addition, when AWGN
is Off, the power for 1xEVDO modulation wave is set to the setting for
RF Level.
For this reason, the transmission power for 1xEVDO modulation wave
changes when AWGN is switched between On and Off.