Filter
Top Products
– 28 –
6. Check the muffler screen and spark arrester.
Replace them if damaged.
7. Install the spark arrester.
NOTE:
Align the spark arrester projection with the hole in the
muffler pipe.
1 Projection
2 Hole
8. Install the muffler screen and the muffler cap.
711-076
q
w
711-077
788-012
2
1
788-013
4
3
710-061a
AE01084
AIR FILTER
1. Loosen the bolt 1 and remove the cover 2.
2. Remove the clip 3 holding the air filter cover 4.
3. Remove the air filter cover and element.
4. Wash the foam element in solvent and dry.
5. Oil the foam element and squeeze out excess oil.
The foam element should be wet but not dripping.
Recommended oil:
Foam-air-filter oil
or
SAE #20 motor oil
7CH-9-10-b 6/18/04 5:58 PM Page 28