Filter
Top Products
– 26 –
788-004a
q
w
700-123b
u
y
t
r
e
700-006a
q
700-065
0°C
25°C
80°F32°F
A YAMALUBE 4(10W-30)
D SAE 10W
C SAE #20
B SAE #30
AE01074
ENGINE OIL REPLACEMENT
1. Place the machine on a level surface and warm up
the engine for several minutes.
Then stop the engine.
2. Loosen the bolt 1 and remove the cover 2.
3. Remove the rubber cap 3 and the oil filler cap 4.
4. Place an oil pan under the engine. Remove the oil
drain plug 5 so that the oil can be completely
drained.
5. Check the drain plug, gasket 6, oil filler cap and
O-ring 7.
If damaged, replace.
6. Reinstall the oil drain plug.
7. Add engine oil to the upper level.
1 Upper level
NOTE:
Recommended engine oil classification:
API Service “SE” or “SF”.
cC
Be sure no foreign material enters the crankcase.
8. Install the oil filler cap, the rubber cap and the
cover.
Recommended oil:
å YAMALUBE 4 (10W-30) or SAE 10W-30
type SE motor oil
∫ SAE #30
ç SAE #20
∂ SAE 10W
Engine oil quantity:
0.6 L (0.53 Imp qt, 0.63 US qt)
Drain Plug Torque:
17 N•m (1.7 kgf•m, 12 lbf•ft)
7CH-9-10-b 6/18/04 5:58 PM Page 26