Filter
Top Products
7
Operating Modes
Select either Index or Mix mode with the push-button / display via the MODE selection --
INDX (index) or MIX.
1. Index mode
- this is used to control both gel strings with ONE DMX channel
- channel descriptions:
- channel 1: positions both gel strings
- channel 2: gel string time-to-destination (ONLY if enabled)
2. Mix mode
- this is used to control the two gel strings with TWO DMX
channels -- each string independently of one another
- channel descriptions:
- channel 1: positions the front gel string (farthest from the mounting plate)
- channel 2: positions the back gel string (nearest the mounting plate)
- channel 3: gel string time-to-destination (ONLY if enabled)
Set the Operating Channel
Set the operating channel with the push-button / display via the CHAN selection. The
CXI channels can be set from 1 to 48 except for channel setting restrictions listed
below.
As with Coloram II, the channel setting formula is:
DMX channel = CXI channel + power supply starting channel - 1
Or, in a different form:
CXI channel = DMX channel - power supply starting channel +1
Example: DMX channel (10) = CXI channel (4) + power supply starting channel (7) - 1
Channel setting restrictions:
For each model power supply, CXI channel setting restrictions are as follows:
Model 19000 - Coloram II 24-Way Power Supply (600 watt)
- set the CXI to any channel from 1 to 48
Model 19012 - Coloram II 12-Way Power Supply (300 watt)
- set the CXI to any channel from 1 to 24
Model 19060 - Coloram II 6-Way Power Supply (150 watt)