Filter
Top Products
7
32
SAFETY INSTRUCTIONS (continued)
Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide
safe equipment can be wiped out by a single careless act of an operator.
Know your controls and how to stop tractor, engine, and cutter quickly in an emergency. Read this manual and
the one provided with your tractor.
In addition to the design and configuration of equipment, hazard control and accident prevention are
dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation,
transport, maintenance and storage of equipment.
It has been said, “The best safety device is an informed, careful operator.” We ask you to be that kind of an
operator. It is the operator’s responsibility to read and understand ALL Safety and Operating instructions in the
manual and to follow these. Accidents can be avoided.
Train all new personnel and review instructions frequently with existing workers. A person who has not read
and understood all operating and safety instructions is not qualified to operate the machine. An untrained
operator exposes himself and bystanders to possible serious injury or death.
Working with unfamiliar equipment can lead to careless injuries. Read this manual, and the manual for your
tractor, before assembly or operating, to acquaint yourself with the machines. It is the rotary cutter owner’s
responsibility, if this machine is used by any person other than yourself, is loaned or rented, to make certain
that the operator, prior to operating:
1. Reads and understands the operator’s manuals.
2. Is instructed in safe and proper use.
SAFETY TRAINING
Do not allow children to operate this machine.
PTO SHAFT (SHEAR BOLT PROTECTED)
PA RTS VIEW & PA RTS LIST
REF. WORKSAVER E & G NO.
NO. PART NO. PART NO. DESCRIPTION REQ'D.
650565 07.422.117.10 Complete Driveline Assembly (SDM40-48) 1
650460 07.422.090.10 Complete Driveline Assembly (SDM40-60) 1
650465 07.422.091.10 Complete Driveline Assembly (SDM40-72) 1
1 650768 141.024.001 Yoke w/ Push Pin (Tractor End) 1
2 650769 180.014.130 Cross Journal Set 2
30 650770 151.014.035 Yoke, Smooth Bore (Imp. End) 1
31 650771 180.013.012 Guard Retaining Collar for Outer Tube 1
33 650712 190.000.019 Bolt, Plastic 6
37 650772 180.013.011 Guard Retaining Collar for Inner Tube 1
40 650773 142.240.004.7420 Complete Guard w/ Instruction Manual (SDM40-48) 1
650774 142.240.059.7420 Complete Guard w/ Instruction Manual (SDM40-60) 1
650775 142.240.060.7420 Complete Guard w/ Instruction Manual (SDM40-72) 1
51 650719 166.026.004 Push Pin Set 1
3
/
8
”1
96 650776 123.240.685.10 Half Female Shaft w/ Guarding (SDM40-48) (Tractor End) 1
650777 123.240.747.10 Half Female Shaft w/ Guarding (SDM40-60) (Tractor End) 1
650778 123.240.748.10 Half Female Shaft w/ Guarding (SDM40-72) (Tractor End) 1
97 650779 123.240.309.10 Half Male Shaft w/ Guarding (SDM40-48) (Imp. End) 1
650781 123.240.509.10 Half Male Shaft w/ Guarding (SDM40-60) (Imp. End) 1
650782 123.240.465.10 Half Male Shaft w/ Guarding (SDM40-72) (Imp. End) 1
98 650726 190.000.098 “DANGER” Label for Outer Tube 1
99 650727 190.000.099 “DANGER” Label for Outer Guard Tube 1