Filter
Top Products
Service 19
MAN0003 (Rev. 11/30/2006)
TINE REPLACEMENT
To replace worn or broken tines (1), remove the 1/2"
nut (3) and bolt (2) as shown in Figure 23. Remove the
worn or broken tine and replace with a new tine. Install
1/2" x 1-1/2" - 20 bolt (2) and 1/2" - 20 nut (3). Torque to
50 lbs-ft (68 N-m). The tine should rotate ±15° when a
small force is applied to the tine. If the tine does not
rotate, loosen the nut until the tine is free to rotate.
Figure 23.
3
1
2