Filter
Top Products
14 Troubleshooting
MAN0003 (Rev. 11/30/2006)
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES SOLUTION
Excessive oil temperature Obstruction in one or both auxiliary
hoses
Visually inspect and replace hoses
as necessary.
Hydraulic oil level on skid steer is
low
Refer to skid steer owner’s
manual.
Hydraulic oil in skid steer is dirty Refer to skid steer owner’s
manual.
Hydraulic oil filter on skid steer is
dirty
Refer to skid steer owner’s
manual.
Relief valve on skid steer is not set
properly
Refer to skid steer owner’s
manual.
Insufficient tilling power The tines are worn or bent Replaced damaged tines.
Debris has built up inside the
chassis
Clean debris from inside of
chassis.
Insufficient hydraulic flow from the
skid steer
Refer to skid steer owner’s
manual.
The hydraulic oil filter on the skid
steer is dirty
Refer to skid steer owner’s
manual.
One or more seals on the motor
have failed
Contact dealer.