Filter
Top Products
Assembly 27
MAN0875 (2/8/2011)
Straight Line Travel
1. Check tire pressure; tires must have equal air
pressure.
2. Check travel; drive forward with both steering
handles full forward at half throttle.
• If travel is not straight, adjust steering handle stop
bolt on opposite side of turn.
• If power unit turns to the left, raise steering stop
bolt on the right.
• If power unit turns to the right, raise steering stop
bolt on the left.
Figure 21. Left Side Steering Stop Bolts
INSTALL SINGLE TAILWHEEL
(OPTIONAL)
1. Attach pivot mount adapter (1) to rear of power unit
frame using two whiz screws (2) and lock nuts (3).
2. Attach pivot housing (4) to pivot mount adapter and
power unit frame using four cap screws (5) and
lock washers (6).
3. Torque hardware to 38 lbs-ft.
4. Inflate tire to 18 psi.
Figure 22. Single Tailwheel Installation
DP4
1. Pivot mount adapter
2. 3/8 NC x 1-3/4 Whiz screw GR5
4. Pivot housing
5. 3/8 NC x 4-1/2 HHCS GR5
6. 3/8 Lock washer
❖