Filter
Top Products
Dealer Check Lists 35
MAN0450 (10/28/2005)
DEALER CHECK LIST
PRE-DELIVERY CHECK LIST
(DEALER’S RESPONSIBILITY)
Inspect the backhoe (and sub-frame when applicable)
thoroughly after assembly to be certain it is set up
properly before delivering it to the customer. The check
lists are a reminder of points to inspect. Check off each
item as it is found satisfactory or after proper adjust-
ments are made.
___ Check all bolts to be sure they are tight.
___ Check that all lubrication points have been
lubricated.
___ Check that all cotter pins and safety pins are
properly installed.
___ Properly attach backhoe (and sub-frame when
applicable) to tractor and make all necessary
adjustments.
___ Check that optional hydraulic reservoir has
been serviced and that hydraulic system and
all functions have been operated through full
cylinder stroke to purge air from system.
___ Make sure all hydraulic fittings are tight and
hoses are properly routed and not twisted, bent
sharply, kinked or pulled tight.
___ After pressurizing and operating all backhoe
functions, stop tractor and make sure there are
no leaks in the hydraulic system. Follow all
safety rules when checking for leaks.
DELIVERY CHECK LIST
(DEALER’S RESPONSIBILITY)
___ Present Operator's Manual (and sub-frame
manual when applicable) and request that cus-
tomer and all operators read it before operating
equipment.
___ Point out all safety features of the equipment.
Explain the importance and meaning of all
safety decals and emphasize the potential haz-
ards when not followed.
___ Show customer how to make adjustments.
___ Explain importance of lubrication and show
lubrication points to customer.
___ Show customer the safe and proper proce-
dures to be used when mounting, dismounting
and storing backhoe (and sub-frame when
applicable).
___ If backhoe is mounted to tractor 3-point hitch,
explain the importance of the Saf-T-Lok limiter.
Point out (as shown in Operator's Manual) the
correct attachment and adjustment of the lim-
iter.
___ Point out the correct mounting of the hydraulic
pump and routing of the hoses. Explain that
during operation, mounting, dismounting and
storage, care must be taken to prevent hose
damage from pulling, twisting and kinking.
___ Show customer the safe and proper proce-
dures to be used when mounting, dismounting
and storing backhoe (and sub-frame when
applicable).