Filter
Top Products
Parts 21
29932 (Rev. 8/10/2007)
MOWER FRAME ASSEMBLY
NOTES:
(a) For all 59, L59 models except: GM2, LB, F10, F13,
F15, H284, JD85, JD95, K17, K18, K210, K260, S,
S55, S-BL, TB, YM.
(b) For use on 59, L59 models: LB, K17, K18, K210,
K260, S55, S-BL, TB, YM.
(c) For F10, F13, F15, GM4, H284, JD85, JD95, S. See
mounting frame assembly drawings for items 12 & 15.
REF PART QTY DESCRIPTION
1 9700 1 Frame only
2 25513 1 Left side shield
3 25512 1 Right side shield
4 6950KT 1 Blade, medium suction (std) -or-
4 26559KT 1 Blade, low suction (optional) -or-
5 26520 1 Side discharge chute
REF PART QTY DESCRIPTION
6 26516 2 Front toe guard
7 ----- 1 Casters, pair (optional)(see page 19)
8 4141 1 Right side skid
9 25506 1 Right belt shield
10 25555 1 Center belt shield (use when front of
mower is bent down) -or-
10 4130 1 Center belt shield (use when front
shield is bolted on mower)
11 25507 1 Left belt shield
12 13314 2 Channel arms (see notes a & c) -or-
12 18241 2 Channel arms (see notes b & c)
13 4097 4 5/8 x 1-1/2 Clevis pin
14 410 2 5/8 x 1-3/4 Clevis pin
15 3485 1 Crosswise rear support (see notes a
& c) -or-
15 18245 1 Crosswise rear support (see notes b
& c)
16 3504 1 1/2 x 5/8 x 1-1/16 Sleeve, HT
17 ----- 1 Leaf mulcher (optional) (see
page 22)
18 5753 1 Complete decal set
18A 52311 1 French safety decal set
19 6126 1 Sheave (3-groove)
20 4227 3 H3/4 Straight bushing with bolts
21 3885 * 3 3/16 x 3/16 x 1-1/4 Key
22 4226 2 Sheave (single-groove)
23 ----- 3 Spindle, blade & wrench kit (white,
left-hand blade rotation)(see
page 18) -or-
23 ----- 3 Spindle, blade & wrench kit (red or
yellow, right-hand blade rotation)(see
page 18)
24 4142 1 Left side skid
25 24650 1 Front roller, complete (optional)
26 24583 1 Front roller, bearing & rod
27 24587 1 Left front roller bracket
28 24586 1 Right front roller bracket
29 5818 1 Front shield (for mowers prior to
1976)
30 25508 † 1 Front corner baffle
31 25509 † 1 Center baffle
32 25532 † 1 Rear mounting angle
33 25531 † 1 Front mounting lug
34 25557 † 1 Center belt shield bracket
40 2688 * 1/8 Safety pin
41 1256 * 3/16 x 1 Cotter pin
42 10378 * 1/4 NC x 1 HHCS GR5
43 1985 * 1/4 Standard lock washer
44 24597 * 3/8 NC x 3/4 Carriage bolt
45 6697 * 3/8 NC x 1 Carriage bolt
46 839 * 3/8 NC x 1 HHCS GR5
47 838 * 3/8 Standard lock washer
48 835 * 3/8 NC Hex nut, plated
49 14350 3/8 NC Flange hex lock nut
50 4119 1/2 NF x 1 HHCS GR5
51 6100 * 1/2 NC x 1-1/4 HHCS GR5
52 3699 * 1/2 NC x 2 HHCS GR5
53 855 * 1/2 Extra-heavy lock washer
54 1093 * 1/2 NC Heavy hex nut
55 11900 1/2 NC Flange hex lock nut
* Obtain locally, standard hardware
† Mower frames sold after 1976 will have
front of mower formed down. Before this
time, mower had a bolt-on front shield.
REF PART QTY DESCRIPTION