Filter
Top Products
Parts 17
29932 (Rev. 8/10/2007)
MOUNTING FRAME ASSEMBLY
REF PART QTY DESCRIPTION
1 6911 2 Chain (7 link)
2 10772 2 Lift angle
3 18314 2 1/2 x 5/8 x 5/16 Sleeve
4 9814 † 1 Idler and mounting frame assembly
(standard)
5 2688 6 5/32 Cotter pin
7 18440 1 Belt (special W180)
8 4336 2 Idler sheave with bearing
9 4335 2 Idler sheave without bearing
10 6095 2 Bearing (for ref 8)
11 3493 1 Drive sheave 6.1 PD
12 1506 1 Spindled bushing with bolts
13 18310 1 Drive shield
14 18241 2 Channel arms (standard) -or-
14 13314 2 Channel arms (use when idler
bracket measures 26-1/2" between
vertical push bars)
15 18245 1 Crosswise rear support
(standard) -or-
15 3485 1 Crosswise rear support (use when
idler bracket measures 26-1/2"
between vertical push bars)
16 18240 1 Rear wheel spacer kit (optional)
(use with 13.6 - 16 turf tires)
17 27207 1 3-Point hitch bracket kit (optional)
(includes two ref 18 and ref 19, and
necessary hardware)
18 18371 2 3-Point hitch lift lug
19 27208 2 3-Point hitch mounting bracket
HARDWARE
20 2457 * 1/4 NC x 3/4 Hex head cap screw
GR5
21 71851 * 5/16 NC x 3/4 Flange head bolt
GR5
22 976 * 3/8 NC x 1-1/2 Hex head cap screw
GR5
23 835 * 3/8 NC Hex nut
24 838 * 3/8 Lock washer
25 565 * 3/8 Flat washer
26 5762 3/8 NC Eye bolt
27 24576 * 1/2 NC x 1-3/4 Hex head cap screw
GR5
28 11900 * 1/2 NC Flange lock nut
29 4097 5/8 x 1-1/2 Clevis pin
30 5836 * 5/8 NC x 2-1/2 Carriage bolt GR5
31 230 * 5/8 NC Hex nut
32 1286 * 5/8 Lock washer
33 692 * 5/8 Flat washer
34 410 5/8 x 1-3/4 Clevis pin
35 2615 * 1/2 NC x 1-1/4 Carriage bolt GR5
36 18250 1/2 NF x 1-1/2 HHCS, GR5 (order
with item 37)
37 23389 Wheel spacer bolt sleeve (order
with item 36)
38 854 * 1/2 Flat washer
39 24667 1/2 x 5/8 x 7/16 Bushing
40 855 * 1/2 Lock washer
* Standard hardware, obtain locally
† On early models where push arms
measure 26-1/2" between them,
also order two #18241, one
#18245, and two #8098.
REF PART QTY DESCRIPTION