Filter
Top Products
Parts 19
29931 (Rev. 6/29/2007)
59 & L59 CASTERS
REF PART QTY DESCRIPTION
1 29750 1 59 & L59 Right & left caster bundle
2 12243 1 Caster yoke (includes bolt, nut & 2
sleeves)
3 29746 (a) 1 Right caster arm asy, 13-5/32" long
-or-
3 6761 (a) 1 Right caster arm 15-5/32" long
4 29747 (a) 1 Left caster arm asy, 13-5/32" long
-or-
4 18424 (a) 1 Left caster arm, 16-5/32" long
5 19703 1 8" HD Caster wheel with sleeve
7 ----- * 1 Straight 1/4 self-tapping grease
fitting (for steel wheel) -or-
7 195 * 1 Straight 1/8P thread grease fitting
(for polyethylene wheel)
8 21020 1 1/4 x 1-1/4 Spirol pin -or-
8 1285 * 1 1/4 x 1-1/2 Cotter pin
9 12296 * 1 1/4 - 28 Straight grease fitting,
15/32" long
10 12169 * 2 3/8 NC x 1-1/4 HHCS GR5
11 838 * 2 3/8 Standard lock washer
12 835 * 2 3/8 NC Hex nut, plated
13 765 * 1 1/2 NC Hex lock nut
14 23479 1 1/2 NC x 5 HHCS GR5
15 29368 (c) 1 1/2 x 3/4 OD x 3-3/8 Sleeve -or-
15 12242 (c) 1 17 GA Wall x 5/8 OD x 3-3/8 tube
16 29375 (b) 2 3/4 Bore flanged bearing for 1-1/8
hole -or-
16 4228 (b) 2 5/8 Bore flanged bearing for 1-3/8
hole -or-
16 2905 (b) 2 5/8 Bore flanged bearing for 1-1/8
hole -or-
16 65578 (b) 2 3/4 Bore x 1.385 flanged wheel
bearing with groove
17 22240 2 3/4 x 1-3/16 x 10 GA Washer
18 4181 2 25/32 x 1 x 1/2 Heat-treated sleeve
* Standard hardware, obtain locally
a For proper caster arm identification, refer to dimension
“L” as shown on drawing. The caster arms may be
used on either side to obtain best fit.
b Measure old bearing.
c Measure outside diameter of old sleeve.