Filter
Top Products
6 Mount Installation
MAN0469 (9/9/2005)
Install Left Rear Mount
1. Using a lifting device, place left mount (2)
between cab support bracket and the tractor
housing. Align holes and install tractor hardware
previously removed.
NOTE: Make sure fuel tank is moved out of the
way to allow access to the cab support.
2. Secure left mount to tractor frame using two cap
screws (5) and hardened flat washers (6).
3. Secure mount to bottom of transmission housing
using one cap screw (4) and hardened flat
washer (6).
4. Attach crossmember (3) to the left mount using
two cap screws 8), four hardened flat washers
(9), and hex nuts (7).
Figure 7. Left Rear Mount Installed
Figure 8. Rear Mount Installation
1
4
8
9
6
5
2
5
6
4
6
6
3
9
7
Tractor
Hardware
CD6756-1
1. 1016200 Right mount
2. 1015401 Left mount
3. 1016216 Crossmember
4. 307550 M20 x 2.0P x 60 mm Cap screw
5. 307553 M20 x 2.5P x 50 mm Cap screw
6. 57798 3/4 Hardened flat washer
7. 307863 M16 x 2.0P Hex nut
8. 37863 M16 x 2.0P x 50 mm Cap screw
9. 57817 5/8 Hardened flat washer