Filter
Top Products
Mount Installation 5
MAN0469 (9/9/2005)
Install Right Rear Mount
1. Using a lifting device, place right mount (1)
between cab support bracket and the tractor
housing. Align holes and install tractor hardware
previously removed. See Figure 3
2. Use two cap screws (5) and hardened flat
washers (6) to secure right mount to tractor
frame. SeeFigure 4.
3. Secure right mount to the bottom of transmission
housing using one cap screw (4) and hardened
flat washer (6). See Figure 5.
4. Attach crossmember (3) to the right mount using
two cap screws (8), four hardened flat washers
(9), and hex nuts (7). See Figure 6.
1. 1015400 Right mount
3. 1016216 Crossmember
4. 307550 M20 x 2.0P x 60 mm Cap screw
5. 307553 M20 x 2.5P x 50 mm Cap screw
6. 57798 3/4 Hardened flat washer
7. 307863 M16 x 2.0P Hex nut
8. 37863 M16 x 2.0P x 50 mm Cap screw
9. 57817 5/8 Hardened flat washer
Figure 3. Right Rear Mount Installed, Cab Support
Figure 4. Right Rear Mount Installed, Tractor Frame
Figure 5. Right Rear Mount Installed, Bottom View
Figure 6. Crossmember to Rear Mount
DP2
1
Cab Support
Bracket
6
5
DP3
4
6
DP4
9
7
9
8
DP5