Filter
Top Products
Installation 7
MAN0728 (8/15/2008)
1029395 HOSE KIT
General Description
These instructions are for operating the loader using
the tractor hydraulic remote control lever. To use this
hydraulic connection, the tractor must be equipped
with the manufacturer’s multi-function hydraulic lever
and four tractor hydraulic couplers (Figure 4).
NOTE: Completion of this installation requires con-
nection to the loader.
Figure 4. Tractor Hydraulic Remote Connection
Assemble Hoses
NOTE: Use thread sealant on all pipe thread connec-
tions and tighten securely to prevent leaks.
1. Attach male quick couplers (2), adapters (3) and
a colored band (4-7) to each loader supply hose
(1).
2. Connect loader supply hoses to loader steel
feedlines on right side of loader as shown in
Figure 6.
1. 1007758 Hose, 46” x 9/16 JICM x 9/16 JICF
2. 316013 Quick Coupler, Male 1/4 NPT
3. 315061 Adapter, 9/16 JICM x 1/4 NPTM
4. 395061 Plastic band, red
5. 395062 Plastic band, band
6. 56061 Plastic band, green
7. 56062 Plastic band, yellow
Figure 5. Hose Connections
Figure 6. Loader Feedline Connection
DP1