Filter
Top Products
6 Mount Installation
MAN0728 (8/15/2008)
Install Grill Guard
1. Attach grill guard mounting brackets (B) to the
right and left sides of the tractor frame. Secure to
each side using two cap screws (C), hardened flat
washers (D), and hex nuts (E).
2. Slide grill guard (A) over outside of mounting
brackets and insert lower bar into slots.
3. Secure into position using two (one per side)
clevis pins (F) and klik pins (G).
4. Remove grill guard (A) whenever hood is raised
for maintenance.
5. Torque the cap screws (C) in the tractor frame to
85 lbs-ft (115 N-m).
A. -------- Grill guard
B. 1029397 Mounting brackets
C. 3379 1/2 NC x 1-1/2 HHCS GR5
D. 57816 1/2 Hardened flat washer
E. 1093 1/2 NC Hex nut
F. 16120 3/8 x 1-1/4 Clevis pin
G. 22411 3/16 x 1 Klik pin
Figure 3. Grill Guard Installation