Filter
Top Products
Mount Installation 5
MAN0728 (8/15/2008)
Attach Right and Left Mounts
1. Attach right mount (1) to tractor frame using five
cap screws (6) and hardened flat washers (5).
NOTE: If tractor is equipped with an undermount
mower, attach mower lift stop link (3) over the rear
two mounting holes. Secure using two cap
screws (4) and hardened flat washers (5).
2. Repeat steps to install left mount (2).
3. Torque hardware to:
M16 x 2.0P . . . . . . . . . . . . . .125 lbs-ft (169 N-m)
1. 1029390 Right rear mount
2. 1029391 Left rear mount
3. 1029443 Mower lift stop
4. 307429 M16 x 2.0P x 55 mm HHCS
(used with item 3 only)
5. 57817 5/8 Hardened flat washer
6. 64062 M16 x 2.0P x 40 mm HHCS
Figure 1. Right Mount Installed
Figure 2. Mount INstallation
DP1
5
6
1