Filter
Top Products
Installation 9
MAN0579 (1/19/2007)
Attach Backhoe Brackets to Backhoe
NOTE: Leave all hardware loose until backhoe has
been mounted to the tractor.
1. Attach right backhoe bracket (3) and left backhoe
bracket (4) to backhoe frame.
2. Secure into position using six (three per bracket)
cap screws (10), hardened flat washers (16), and
hex nuts (19).
3. Place crossbrace (8) between right and left back-
hoe brackets. Secure using four cap screws (13),
hardened flat washers (18), and hex nuts (21).
3. 1023006 Right backhoe bracket
4. 1023007 Left backhoe bracket
8. 1024322 Crossbrace
10. 735 3/4 NC x 2 HHCS GR5
13. 3379 1/2 NC x 1-1/2 HHCS GR5
16. 57798 3/4 Hardened flat washer
18. 57816 1/2 Hardened flat washer
19. 1450 3/4 NC Hex nut
21. 1093 1/2 NC Hex nut
Figure 10. Backhoe Bracket Installation
As a valued customer, Woods appreciates your comments. Once sub-frame and hydrau-
lic hoses have been installed, please take a few minutes to complete the Sub-Frame
Mount Evaluation sheet that was supplied with your sub-frame. Your comments will help
us continue to bring you quality products.