Filter
Top Products
10
Edging
Edging
Direction
SCALPING
The scalping technique removes unwanted
vegetation down to the ground. Hold the bot-
tomof thetrimmer headabout3 inc hes(8cm)
above the ground and at an angle. Allow the
tipofthelinetostrike theground aroundtrees,
posts, monuments, etc. This technique in-
creases line wear.
Scalping
MOWING
Your trimmer is ideal for mowing in places
conventional lawn mowers cannot reach. In
the mowing position, keep the line parallel to
the ground. A void pressing the head into the
ground asthis canscalpthe g roundanddam-
age the tool.
Mowing
SWEEPING
The fanning action of the rotating line can be
used for a quic k and easy clean up. Keep the
line parallel to and above the su rfaces being
swept and move the tool from side to side.
Sweeping
MAINTENANCE
WARNING: Disconnect unit from
power source befor e performing mainte-
nance.
GENERALRECOMMENDATIONS
Thewarrantyonthisunit doesnotco veritems
that have been subjected to operator abuse
or negligence. To receive full value from the
warranty, the operator must maintain unit as
instructed in this manual. Various adjust-
ments will need to be made periodically to
properly maintain your unit.
BEFORE EACH USE
CHECK FOR LOOSE
FASTENERS AND PARTS
S Housing Screws
S Debris Shield
CHECK FOR DAMAGED OR
WORN PARTS
Contact an authorized service dealer for re-
placement of damaged or worn parts.
S T rigger Sw itch -- Ensu re switch funct ions
properly by pressing andreleasing the trig-
ger switch. Make sure motor st ops.
S Debris Shield -- Discontinue use of unit if
debris shield is damaged.
AFTER EACH USE
INSPECT AND CLEAN UNIT AND LA-
BELS
S After each use , inspect complete unit for
loose or dam agedpart s. Neveruse adam-
aged trimmer.
S Clean the unit using a damp cloth with a
mild detergent.
S Wipe off unit with a clean dry cloth.
S Use a soft brushto cleanaround the inside
ofthedebris shield,thecuttinghead andthe
motor housing air vents.