Filter
Top Products
11
Mowing
SWEEPING
The fanning action of the rotating line can be
used fora quick andeasy clean up. K eepthe
line parallel to and above the surfaces being
swept and move the tool from side to side.
Sweeping
MAINTENANCE
WARNING: Keep hands and fingers
awayfromthetriggerswitchtoavoidacciden-
tal starting during m aintenance.
GENERALRECOMMENDATIONS
Thewarrantyonthisunitdoesnotcoveritems
that have been subjected t o operator abuse
or negligence. To receive full value from the
warranty , the operator must m aintain unit as
instructed in this manual. V arious adjust-
ments will need to be made periodically to
properly maintain your unit.
BEFORE EACH USE
CHECK FOR LOOSE
FA STENERS AND PARTS
S Housing Screws
S Debris Shield
CHECK FOR DAMAGED OR
WORN PARTS
Contact an authorized service dealer for re-
placement of damaged or worn parts.
S Trigger Switch -- Ensure switch functions
properly by pressing andreleasing thetrig-
ger switch. Make sure motor stops.
S Debris Shield -- Discontinue use of unit if
debris shield is damaged.
AFTEREACHUSE
INSPECTAND CLEANUNIT ANDLA-
BELS
S After each use, inspect complete unit for
loose ordamaged par ts. Never use adam-
aged trimmer .
S Clean the unit using a damp cloth with a
mild detergent.
S Wipe of f unit with a clean dry cloth.
S Use asoft brushto clean around theinside
ofthedebri sshield,thec uttingheadandthe
motor housing air vents.
Air Vents
S Remove the wheel by pressing one of the
buttons. Cleanthewheelandgrooveonthe
motor housing with a soft brush. Reinstall
wheel (see ASSEMBLY s ec tion).