Filter
Top Products
-- 7 --
REPLACE FUEL FILTER
Toreplacefuelfilter, drainunitby r unningitdry
of fuel, then remove fuel cap/retainer assem-
bly from tank. Pull filter from t a nk andremove
it fromthe fuelline.Installnew fuelfilter onfuel
line; reinstall par ts.
Fuel Line
Fuel Filter
CHECK MUFFLER MOUNTING
SCREWS
Once each year, ensure muffler mounting
screws are secure and tightened properly to
prevent damage.
Mounting
Screw
Holes
Muffler Cover
Screws
1. Loosen and removethe 2screws from the
muffler cover .
2. Remove the muffler cover.
3. Tighten the2 muffler mounting screws se-
curely.
4. Reinstall muffler cover and 2 screws.
Tighten securely.
INSPECT MUFFLER AND SPARK
ARRESTING SCREEN
WARNING: The muffler on this prod-
uct contains chemicals known to the State of
California to cause cancer.
As the unit is used, carbon deposits build up
on the muffler and spark arresting screen,
and must be removed to avoid creating a f ire
hazard or affecting engine performance.
VIEW OF MUFFLER
Exhaust
Diverter
Screws
Spark arresting
screen
Replace the spark arresting screen every 50
hours ofoperation orif any damage orbreaks
in the screen are noted.
NOTE: Do notattemptto clean thespark ar-
resting screen.
1. Loosen andremovethe 2screws fromthe
muffler cover . Remove the muffler cover.
2. Loosen and remove both screws from the
exhaust diverter.
3. Remove the exhaust diverter and spark
arresting screen.
4 Install new spark arresting screen.
5. Reinstall exhaust diverter and both
screws. Tighten screws securely.
6. Reinstall muffler cover and 2 screws.
Tighten securely.
NOTE: If any part of the muf fler is cracked,
broken or damaged, we recommend that t he
muffler be r eplaced.
CARBURETOR ADJUSTMENT
There is no screw for idle adjustment on your
blower. The throttle lever is used to control
engine speed. The throttle lever can be
placed in one of four positions: STOP, IDLE
or
, FULL THROTTLE or , a nd one
intermittentposition. Ifyourenginewillnotrun
properly or you require further assistance,
contact an authorized service dealer or call
1--800--554--6723.
STORAGE
WARNING: Perform the following
steps after each use:
S Allow engine to cool, and secure the unit
before storing or transporting.
S Store unit and fuel in a well ventilated area
where fuel vapors cannot reach sparks or
open flames from water heaters, electric
motors or switches, furnaces, etc.
S Store unit with all guards in place. Position
unit so that any sharp object cannot acci-
dentally cause injur y.
S Store unit and fuel well out of the reach o f
children.
SEASONAL STORAGE
Prepare unit for storage atend of season or if
it will not be used for 30 days o r more.
If your unitis to be stored f or aperiod of t im e:
S Clean the entire unit before lengthy stor-
age.
S Store in a clean dry area.
S Lightly oil external metal surfaces.
FUEL SYSTEM
Under FUELING ENGINE in the OPERA-
TIONsectionof thismanual,see m essagela-
beled IMPORTANT regarding the use of ga-
sohol in your engine.