Filter
Top Products
4.42 WATLOW Series 988 User’s Manual
Setup Menus, Chapter 4
Setup-Global
High Power Limit
Select the high limit for the percent output. For cooling (direct acting)
enter a negative number.
[`HiP] This prompt always appears.
If Default
↓↓
[`LoP] … [`100]
%
a heat/cool
[`HiP] [`HiP]
application
[`LoP] … [`100]
%
a heat only
[`HiP] [`HiP]
application
[`LoP] … [```0]
%
a cool only
[`HiP] [`HiP]
application
Auto-tune Set Point
Select the percentage at which the controller will auto tune the cur-
rent control set point.
[AtSP] This prompt always appears.
Default
↓
[``50] … [``90] … [`150] %
[AtSP] [AtSP] [AtSP]
[`HiP]
[AtSP]
C4.wc 5/14/1999 8:49 AM Page 4.42