Filter
Top Products
Software Filter 2
Select the filter time constant, in seconds, for input 2. This smooths a
rapidly changing input signal for display or control purposes.
• Select a positive value to filter only the display.
• Select a negative value to filter the input signal.
• Set the value to [```0] to disable the filter.
[Ftr2] This prompt appears only on controllers equipped with input 2
hardware and with [`In2] not set to [``no] or [`Ei2].
Default
↓
[`-60] … [```0] … [``60]
[Ftr2] [Ftr2] [Ftr2]
Linearization 2
Select square root linearization for input 2.
[Lin2] This prompt appears only if you have set Input 2 [`In2] to a
process input or to a thermocouple input set to [0-50] mV.
Default
↓
[``no] [root]
[Lin2] [Lin2]
WATLOW Series 988 User’s Manual 4.15
Setup Menus, Chapter 4
Setup-Input
[Ftr2]
[Lin2]
˜
NOTE:
See Chapter 8 for
more information
on input lineariza-
tion.
C4.wc 5/14/1999 8:48 AM Page 4.15