Filter
Top Products
Specifications
4
MODEL MC
TRANSMISSION (continued)
Neutral Transmission Release by Manual Dump Valve
Final Drive Gear Drive Axle
Transmission Fluid
Factory Service Mobil 1 Synthetic Motor Oil (15W-50)
Alternate Transmission Fluid SAE 30W Straight Viscosity Motor Oil
Transmission Fluid Capacity 1 qt (1 liter)
Transmission Cooling Cooling Fan Mounted on Drive Pulley
Ground Travel Speed
Forward m.p.h. (km/h)
Reverse m.p.h. (km/h)
0-5 (0-8) Infinitely Variable
0-5 (0-8) Infinitely Variable
BLADE DRIVE
PTO Shaft Quick Disconnect Spline Shaft with Two High-Speed U-Joints
Blade Spindle Each Blade (2) Mounts Direct on Peerless Right Angle
Gearbox with Tee Gearbox in Center Connected to PTO Shaft
(Complete Geared Drive, Peerless Model 1000 Gearboxes)
Blade Drive Clutch and Brake Manual Belt Tightener Clutch and Band Brake
(Stops Blades within Five (5) Seconds of Disengagement)
Max. Blade Speed
[22 in. (56 cm) Blade] @ 3600
RPM Engine
2900 RPM
[16700 FPM (5090 m/min)]
TIRE SIZE
Deck Caster Wheel
36, 42, 48, 56
52, 62, 74
8 x 3.00-4 Pneumatic (4-Ply)
11 x 4.00-5 Pneumatic
Deck Caster Wheel (Optional)
36, 42, 48, 56 8 x 3.00-4 Foamed Rubber
Drive 18 x 8.50-10 (4-Ply Low-Profile)
Drive (Optional Narrow Tire) 18 x 7.00-8 (4-Ply)
Rear 13 x 6.50-6 (4-Ply)
TIRE PRESSURE
Deck Caster Wheel 20 PSI (137 kPa)
Drive 15 PSI (103 kPa)
Rear
20 PSI (137 kPa)
DIMENSIONS (Tractor and Mower)
Length
36 in. (91 cm) GHS Model 87 in. (221 cm)
42 in. (107 cm) GHS Model 89 in. (226 cm)