Filter
Top Products
25
Frequency Coverage (MHz): Channel 1: 162.550
Channel 2: 162.400
Channel 3: 162.475
Channel 4: 162.425
Channel 5: 162.450
Channel 6: 162.500
Channel 7: 162.525
Receiving Sensitivity
(at 12 dB SINAD): 0.35
µV
FIPS Decode Sensitivity @Dev. ±4.5 kHz
Deviation/90 % Success Rate: 0.4
µV
Signal & Noise Ratio: 40 dB
Channel Selectivity: 60 dB
Audio Output Power (Maximum): 300 mW
Power Requirements: Use AD-100W (adapter included)
with 120 V AC (±10%) 60 Hz
Battery Back-up: One 9-Volt Alkaline Battery
(not included)
ALERT terminal output
(w/3.9 K ohm load): 2.4 V DC
Antenna: Telescopic Rod Antenna (built-in)
Dimensions: 180 (W) x 130.5 (D) x 45 (H) mm
Weight: 350 g without AC ADAPTER and
9 V Battery
Specifications are typical; individual units might vary.
Specifications are subject to change and improvement without notice.
TECHNICAL SPECIFICATIONS
wx100.qxd 7/26/00 11:47 AM Page 25