Filter
Top Products
6
Chapter 2
Installation
This Chapter covers the physical installation of the TW100-BRM504.
Requirements
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and a DSL connection.
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the TW100-BRM504.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the TW100-
BRM504. Both 10BaseT and 100BaseT connections can be used simultaneously.
If required, connect any port to a normal port on another Hub, using a standard LAN cable.
Any LAN port on the TW100-BRM504 will automatically function as an "Uplink" port
when required.
3. Connect ADSL Cable
Connect the supplied ADSL cable from to the WAN port on the TW100-BRM504 (the
RJ11 connector) to the ADSL terminator provided by your phone company.
2