Filter
Top Products
Introduction
5
Rear Panel
Figure 3: Rear Panel
Power port
Connect the supplied power adapter here.
10/100BaseT
LAN connections
Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.
Note:
Any LAN port on the TW100-BRM504 will automatically function
as an "Uplink" port when required. Just connect any port to a normal
port on the other hub, using a standard LAN cable.
Reset Button
(Reset to Defaults)
This button will reset the TW100-BRM504 to the factory default
values.
To do this, press and hold the Reset Button for five (5) seconds, until
the Status LED is lit, then release the Reset Button, and wait the
TW100-BRM504 to restart using the factory default values.
WAN port
(ADSL port)
Connect this port to your ADSL line.