Filter
Top Products
Setup
9
Configuration Program
The TW100-BRM504 contains an HTTP server. This enables you to connect to it, and config-
ure it, using your Web Browser. Your Browser must support JavaScript.
The configuration program has been tested on the following browsers:
• Netscape V4.08 or later
• Netscape 7
• Internet Explorer V5.01 or later
Preparation
Before attempting to configure the TW100-BRM504, please ensure that:
• Your PC can establish a physical connection to the TW100-BRM504. The PC and the
TW100-BRM504 must be directly connected (using the Hub ports on the TW100-
BRM504) or on the same LAN segment.
• The TW100-BRM504 must be installed and powered ON.
• If the TW100-BRM504's default IP Address (192.168.0.1) is already used by another
device, the other device must be turned OFF until the TW100-BRM504 is allocated a new
IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the TW100-BRM504:
1. After installing the TW100-BRM504 in your LAN, start your PC. If your PC is already
running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the TW100-BRM504, as in this
example, which uses the TW100-BRM504's default IP Address:
HTTP://192.168.0.1
4. When prompted for the User name and Password, enter values as follows:
• User name admin
• Password password