Filter
Top Products
Changes in season and temperature generally require a
change in zone run time to maintain a healthy landscape
and conserve water. The Season Adjust feature enables
you to change the run time of all zones assigned to a
program, simultaneously up or down, in 10% increments
– with just the press of a button. Adjustments can be
reduced to 10% or increased to 200% of the programmed
run time of each zone.
A 50% setting, for example, would decrease a 20-minute
zone run time to 10 minutes. Increases however, work
a little differently. With any adjustment above 100%, the
ECXTRA will first increase the run time by the adjust-
ment percentage, then split the time in half and run the
watering program twice. This allows the water to soak
in instead of pooling or running off. For example, adjust-
ing to 150% would first increase a 20-minute zone run
time to 30 minutes, then split the time in half and run two
watering cycles back-to-back with 15 minutes in each
operation. During operation the % symbol will flash to
indicate a multiple watering operation.
Note: All zone run times are retained in the timer memory
and returned to their set value when the season adjust is
reset to 100%. The only time a zone run time will appear
changed is during operation.
Turn the control dial to the
season adjust posi-
tion. The season adjust display will be shown and
100% will be flashing.
Check the programs switch setting. If necessary,
reposition the switch to select the desired program.
Press the +/on or –/off until the desired adjustment
value is flashing.
4. To apply the Season Adjust feature to another pro-
gram, repeat steps and .
Return the control dial the run position.
Note: The Season Adjust symbol will be displayed in
all dial positions as a reminder that this feature is in use.
Using the Season Adjust Feature
34
5
3
3
2
1