Filter
Top Products
8-7
8 PARAMETERS SETTING MODE
Turning OFF the Password
After a password is established, you can disable the password option. Once you disable the option, the
password-input screen will not appear every time you power on the instrument.
Turning OFF the Password Option
2
The password option screen will appear.
When accessing the password option for the
first time, the [OFF] indicator will appear on
the upper left corner of the screen. To
establish a password you can press the
[F5](ON) key to turn on the option and
establish a password.
3
The password-input screen will appear. At the
blinking cursor type in your password and
press the [ENT] key.
IMPORTANT:
DON'T FORGET YOUR PASSWORD.
WRITE THE PASSWORD DOWN ON
A PIECE OF PAPER AND PUT IN A
SAFE PLACE. ONCE A PASSWORD
IS STORED YOU CAN NOT ERASE IT
FROM MEMORY.
[F5]
Type
password
[ENT]
4
The confirmation screen will appear to
confirm your password.
Type the password in once again and press
[ENT].
Type
password
[ENT]
5
The password option screen will appear once
again for 2 seconds and will automatically
change to the main menu icons. Notice the
[ON] indicator is now shown on the display.
Operating procedure Operation Display
1
From the main menu icons, press [F6](Para)
to access the parameters option menu.
Press [F3](Password) to access the
password option.
[F6]
[F3]
2
Type in your password and press [ENT].
3
The password option screen will appear. The
indicator on the upper left side of the screen
will show [ON].
Type
password
[ENT]
Password
Input a password
[ ]
EXIT BS
Password
Input again (confirmation)
[ ]
EXIT BS
Password
[ON]
EXIT CHANGE ON OFF
Parameters
F1 Measurement
F2 Communication
F3 Password
Password
Input a password
[ ]
EXIT BS
Password
[ON]
EXIT CHANGE ON OFF