Filter
Top Products
Assembly Section 2-19
ASSEMBLY
AXLE BRACE MOUNTING
The axle braces are to be mounted under the rear axle of the tractor. The other
end of the axle brace mounts to the lower rear corners of the main frame. After
attaching the boom rest, it should fit tightly and level under the tractor. Attach the right
and left axle brace to the main frame with hardware shown in the parts section and
tighten. Attach the axle braces to the rear axle using the mounting hardware shown
in the parts section, but DO NOT tighten.
BOOM REST MOUNTING
Carefully raise the boom rest and align the holes with those of the axle brace.
Now install all attaching hardware as shown in the parts section loosely, to allow for
the alignment with the left and right axle brace. Tighten / torque all hardware on the
axle braces and the boom rest. If mounting the 60” rotary head, attach the additional
stop to the lower resting position as shown in the parts section. Finally, add the rest
strips to the boom rest as shown in the parts section.