Tiger JD 5093E Lawn Mower User Manual


 
Side & Rear Flail Operation Section 3-2
OPERATION
Safety is of primary importance to the owner / operator and to the manufacturer.
The first section of this manual includes a list of Safety Messages, that, if followed,
will help protect the operator and bystanders from injury or death. Many of the
messages will be repeated throughout the manual. The owner / operator / dealer
should know these Safety Messages before assembly and be aware of the hazards
of operating this mower during assembly, use, and maintenance.
The Safety Alert Symbol combined with a signal word, as seen below, is
intended to warn the owner / operator of impending hazards and the degree of injury
possible during operation.
Indicates an imminently hazardous situation that, if not avoided, WILL result in DEATH
OR VERY SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, COULD result in
DEATH OR SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR
INJURY.
Identifies special instructions or procedures that, if not strictly observed, could result
in damage to, or destruction of the machine, attachments or the enviroment.
NOTE: Identifies points of particular interest for more efficient or convienient operation or
repair. (SG-1)
Before any operation of tractor and mower, the user should read and
understand the safety and operating instructions for both the tractor and
the mower. The user should also be familiar with the location and
functions of the units instruments and controls. Being familiar with the
machine and it’s controls will increase efficiency and reduce possibility of
serious injury or damage to the unit. The operator should work slowly and carefully
until he feels comfortable with the machine. Speed and skill will be attained much
easier if the necessary time is spent to familiarize yourself with the machine and its
operations.
Since tractor makes and models vary, we recommend reading and following the
operators manual provided by the manufacturer pertaining to your particular unit.
IMPORTANT!